BB400-KIT

A BB400 Solderless BreadBoard, 10cm Male-to-Male ZipWire™, 3AA Battery Box, and an LED with resistor

  • 400 tie points total: 300 tie-point IC-circuit area plus two 50 tie-point distribution strips providing 4 power rails.
  • Smooth machined male pins designed for breadboard use provides 4.5 Volt power from 3 AA cells (not included).
  • 28AWG ribbon cable can be unzipped to remove individual wires. Wires can be unzipped in groups to organize signals, or as individual wires.
  • 5mm Green LED and 330Ω Resistor
BreadBoard-400 is a solderless (plug-in) breadboard with 400 connection tie-points (i.e. 400 wire insertion holes). It has 4 power rails. Solderless breadboards are great for building and testing new circuits because parts can be easily inserted and removed. They are completely re-usable. The BB400 has a 300 tie-point IC-circuit area plus four 25 tie-point power rails. The housing is made of white ABS plastic, with a printed legend giving numbers and letters for columns and rows. The internal contacts are phosphor bronze with a plated nickel finish. A peelable adhesive tape backing is provided for attaching it to a surface. BPS BreadBoards are Lead-Free and RoHS Compliant. Finished projects can be moved to a SB400 or SB404 Solderable PC BreadBoard to make them permanent.
ZipWire™ provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed. The color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow colored ribbon cable provides the 10 standard electrical colors. Each ZipWire ribbon provides 40 wires, four of each color. The 10cm wires work great for signals within a solderless breadboard (such as the BB400 and BB830). When connecting to a group of signals (such as UART or SPI signals), a group of attached ZipWires can be used to keep the signals together to better manage your wiring. Male pins can be used with solderless breadboards or 0.1” pitch sockets.
The PW-3AA battery box has breadboard pins designed to plug into your breadboard. The machined male breadboard pins with strain relief heatshrink tubing provide a reliable long-lasting connection (as opposed to tinned wires that fatigue and break). The battery box holds 3 AA batteries to provide 4.5 Volt power for your projects. A built-in slideswitch turns power on and off. The battery box is best for circuits that don’t need an exact supply voltage. The voltage will go down from 4.5 Volts to 2.4 Volts as the batteries drain. For example, transistor circuits often work over a wide voltage range, and some integrated circuits accept a wide 3.3V to 5V supply voltage. If your circuit needs exactly 3.3 Volts, you will need to add a LDO (low dropout regulator). If your circuit needs 5 Volts, you need more AA batteries and a 5V regulator.

BB400

BreadBoard-400 (400 point BreadBoard)

ZW-MM-10

ZipWire, Male-Male, 40 Unzippable Wires x 10cm

PW-3AA

3AA Battery Box with Switch and attached BreadBoard pins

BB830-KIT

BB830 BreadBoard, 10cm ZipWires, Battery Box and Parts

SB404

SB404 Solderable PC BreadBoard

JRG01-KIT

Junior Genius Blinky Lights Kit